Skip to main content

mpfa command

Use the mpfa command to get Memory Predict Failure Analysis Raw Data.

mpfa command syntax

OneCli.exe [misc] mpfa  [options]
Table 1. mpfa command specific parameters
ParameterRequired/OptionalNotes
--sftpOptional

SFTP connection information. Format: user:password@IP[port][dir/]. The address is used to save FFDC logs for VMWare ESXi.

--uploadOptional

This parameter can be specified with the following arguments: lenovo and server address.

If specified with lenovo, the format is: --upload lenovo. The inventory data is uploaded to Lenovo Upload Facility. Users should specify the case number, or specify both machine type and serial number.

If specified with server address, the format is: --upload server address. The inventory data is uploaded to the target server. The supported protocols include: TFTP, FTP, and SFTP.

If not specified, no inventory data will be uploaded.

  • --bmc, -b

  • --bmc-cim-port, -p

  • --bmc-password, -w

  • --bmc-username, -u

  • --config

  • --check-trust, -C

  • --never-check-trust, -N

  • --node, -n

  • --nolog, -n

  • --output, -o

Optional

Refer to Table 2.

Example of the mpfa command

OneCli.exe misc mpfa --bmc USERID:PASSW0RD@xx.xx.xx.xx