Skip to main content

multimpfa command

Use the multimpfa command to get Memory Predict Failure Analysis Raw Data for multiple servers.

multimpfa command syntax

OneCli.exe misc multimpfa <command> <command> [options] [connection options] <--configfile <arg>>
Table 1. multimpfa command specific parameters
ParameterRequired/OptionalNotes
--sftpOptional

SFTP connection information. Format: user:password@IP[:port][/directory/]. It should be specified in VMware ESXi operating systems.

--uploadOptional

This parameter can be specified with the following arguments: lenovo and server address.

If specified with lenovo, the format is: --upload lenovo. The inventory data is uploaded to Lenovo Upload Facility. Users should specify the case number, or specify both machine type and serial number.

If specified with server address, the format is: --upload server address. The inventory data is uploaded to the target server. The supported protocols include: TFTP, FTP, and SFTP.

If not specified, no data will be uploaded.

  • --config

  • --check-trust, -C

  • --never-check-trust, -N

  • --node, -n

  • --nolog,-n

  • --output, -o

Optional

Refer to Table 2.

Example of the multimpfa command

OneCli.exe misc multimpfa –configfile multi_task_config.json