FQXSPCA0007J : Numeric sensor [NumericSensorElementName] going high (upper non-critical) has asserted.
Numeric sensor [NumericSensorElementName] going high (upper non-critical) has asserted.
This message is for the use case when an implementation has detected an Upper Non-critical sensor going high has asserted.
Severity
Warning
Alert Category
Warning - Temperature
Serviceable
Yes
SNMP Trap ID
12
Automatically Notify Support
No
User Action
Complete the following steps:
- Check the event log of system management module and XClarity Controller for any cooling related issue.
- Make sure CDU supply water temperature and flow rate per tray is within operating specifications.
- Make sure waterloop assembly and maifold are installed correctly.
- Make sure that the room temperature is within operating specifications.
- If the problem persists and there are no other DIMMs with the same indication, replace the DIMM.
Give documentation feedback