Skip to main content

FQXSPPU0001N : An Over-Temperature Condition has been detected on [ProcessorElementName].

An Over-Temperature Condition has been detected on [ProcessorElementName].

This message is for the use case when an implementation has detected an Over-Temperature Condition Detected for Processor.

Severity​

Error

Alert Category​

Critical - Temperature

Serviceable​

Yes

CIM Information​

Prefix:PLAT

and ID:0036

SNMP Trap ID​

0

Automatically Notify Support​

No

User Action​

Complete the following steps:

  1. Check the event log of system management module and XClarity Controller for any cooling related issue.
  2. Make sure CDU supply water temperature and flow rate per tray is within operating specifications.
  3. Make sure waterloop assembly and maifold are installed correctly.
  4. Make sure that the room temperature is within operating specifications.
  5. If the problem persists and there are no other DIMMs with the same indication, replace the DIMM.