Skip to main content

Network Configuration

You can modify networking parameters in Network configuration.

You can modify following networking parameters in Network configuration section:

  • Host Name

  • DNS Domain Name

  • Auto Negotiation Mode

  • Network Speed

  • Duplex Mode

  • IP Version (IPv4, IPv6) Enable/Disable

  • IP Address

  • IP Source (Static and DHCP)

  • Gateway

  • Subnet Mask

  • DNS Server

  • VLAN

Figure 1. Network Configuration
Network Configuration

General Settings

To change the Network settings may change IP address settings. Each change to settings may cause a loss in connectivity and the termination of all sessions. Changes may not take effect immediately.

Default settings for Network configuration:

  • Host Name: lenovo-FPC

  • DNS Domain Name: lenovo.com

Figure 2. Network Interface configuration
Network Interface configuration

Click on the item of Network Interface Configuration leads to the detail network settings.

Default settings for Network Interface Configuration:

  • Auto Negotiation: On

  • Dynamic DNS: Unchecked

  • Use DHCP for DNS Domain Name: Unchecked

  • Respond to ARP: Checked

Figure 3. IPv4 Settings
IPv4 Settings
Default settings for IPv4 Settings:

  • IPv4: Enabled

  • Use DHCP: Unchecked

  • IP Address: 192.168.0.100

  • Subnet Mask: 255.255.255.0

  • Gateway: 192.168.0.1

  • Preferred/Alternate DNS Server: Blank

Figure 4. IPv6 Settings
IPv6 Settings
Default settings for IPv6 Settings:

  • IPv6: Enabled

  • Auto configuration = Checked (IP = LLA)

  • Use DHCP to obtain DNS server addresses = Unchecked

  • Preferred/Alternate DNS Server = Blank

Figure 5. VLAN Settings
VLAN Settings
Default settings for VLAN Settings:

  • VLAN: Disabled