Skip to main content

Dust filter replacement

Follow instructions in this section to remove or install a dust filter. The server might or might not come with this component.

Note
Depending on the mounting option, the node can stand alone in desktop mount or be installed in an enclosure or a node sleeve.
  • For an enclosure, the dust filter is located in the shipping bracket.
  • For a node sleeve, the dust filer is located in the security bezel, if applicable.

  • For the removal or installation of a shipping bracketor security bezel from or to an enclosure or node sleeve, see Configuration guide.

Important
  • Depending on the environment, check the status of the dust filter at least every 3 months to make sure it is functional.
  • It is recommended to have a dust filter installed when the server is in operation.
  • Remove the dust filter
    Follow instructions in this section to remove the dust filter from the shipping bracket of an enclosure or the security bezel of a node sleeve.
  • Install a dust filter
    Follow instructions in this section to install a dust filter into the shipping bracket of an enclosure or the security bezel of a node sleeve.