Skip to main content

Remove the dust filter from the shipping bracket

Follow instructions in this section to remove the dust filter from the shipping bracket.

About this task

Attention

Procedure

  1. Loosen the captive screws of the shipping bracket.
    1. Loosen the three captive screws on the front.
    2. Loosen the four captive screws on both sides.
    3. Loosen the captive screw on the top.
    Figure 1. Loosening the screws

  2. Pull the shipping bracket to remove it from the enclosure.
    Figure 2. Removing the shipping bracket

  3. Remove the dust filters from the shipping bracket.
    Note
    • Depending on the configuration, some parts in the following illustration might not come with the system.
    • For optimal server operation, make sure to install a replacement dust filter.
    Figure 3. Removing the dust filters
    Removing the dust filters

After this task is completed

  • Install a replacement unit. See Install the dust filter to the shipping bracket.

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.