Remove the rear dust filter
Follow instructions in this section to remove the rear dust filter.
About this task
Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
If the node is installed in an enclosure or mounted, remove the node from the enclosure or mount. See Configuration guide.
Procedure
- Loosen the two captive screws that secure the rear bezel; then, remove the bezel.Figure 1. Removing the bezel
- Remove the dust filter from the chassis.NoteFor optimal server operation, make sure to install a replacement dust filter.Figure 2. Removing the dust filter
After this task is completed
- Install a replacement unit. See Install the rear dust filter.
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.
Demo Video
Give documentation feedback