Skip to main content

Remove the WLAN antennas

Follow instructions in this section to remove the WLAN antennas.

About this task

Attention

Procedure

  1. Locate the WLAN antenna to be removed.
    Figure 1. Locations of WLAN antennas

    Note
    The orientation of the following table aligns with the above illustration.
    1 Antenna 1 (XCC WLAN)4 Antenna 4 (x86 WLAN)
    2 Antenna 2 (XCC WLAN)3 Antenna 3 (x86 WLAN)
  2. Rotate the antenna counterclockwise; then, remove it from the node.
    Figure 2. Removing a WLAN antenna

After this task is completed

  • Install a replacement unit. See Install the WLAN antennas.

  • If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.

Demo Video

Watch the procedure on YouTube