Node component replacement
Follow instructions in this section to remove and install the node components.
S002
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
- Air baffle replacement
Follow instructions in this section to remove and install the air baffle. - Air flow sensor board replacement
Follow instructions in this section to remove and install the air flow sensor board. - Bezel detect switch with cable replacement
Follow instructions in this section to remove and install the bezel detect switch with cable. - Cable wall with heat sink detect switch replacement
Follow instructions in this section to remove and install the cable wall with heat sink detect switch. - CMOS battery (CR2032) replacement
Follow instructions in this section to remove and install a CMOS battery (CR2032). - Fan module replacement
Follow instructions in this section to remove and install the fan modules. - Fan cage and fan control board (FCB) replacement
Follow instructions in this section to remove and install the fan cage and the fan control board (FCB). - Front hot-swap drive and front drive backplane replacement
Follow instructions in this section to remove and install the front hot-swap drives and the front drive backplane. - Internal drive, drive cage, and drive backplane replacement
Follow instructions in this section to remove and install the internal drives, drive cage, and drive backplane. - Intrusion switch with cable replacement
Follow instructions in this section to remove and install the intrusion switch with cable. - M.2 backplane assembly and M.2 drive replacement
Follow instructions in this section to remove and install the M.2 backplane assembly, M.2 drive and M.2 backplane. - Memory module replacement
Use the following procedures to remove and install a memory module. - MicroSD card replacement
Follow instructions in this section to remove and install the MicroSD card. - OCP module replacement
Follow instructions in this section to remove and install the OCP module. - PCIe riser assembly and adapter replacement
Follow instructions in this section to remove and install the PCIe riser assemblies and adapters. - PCIe riser card replacement
Follow instructions in this section to remove and install the PCIe riser cards. - Power distribution board and PDB cage replacement
Follow instructions in this section to remove and install the power distribution board and the PDB cage. - Power supply unit replacement
Follow instructions in this section to remove and install a power supply unit. - Processor and heat sink replacement (trained technician only)
Follow the instruction in this section to remove or install a processor or a heat sink. - RAID flash power module (supercap) replacement
Follow instructions in this section to remove and install a RAID flash power module (supercap). - RAID flash power module holder replacement
Follow instructions in this section to remove and install the RAID flash power module holder. - Security bezel and dust filter replacement
Follow instructions in this section to remove or install the security bezel and the dust filter. - Security bezel keylock bracket replacement
Follow instructions in this section to remove or install the security bezel keylock bracket. - Serial port module replacement
Follow instructions in this section to remove or install the serial port module. - System board replacement (trained technician only)
Follow instructions in this section to remove and install the system board. - Top cover replacement
Follow instructions in this section to remove and install the top cover.
Give documentation feedback