FQXSPMA0002N : Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
Configuration Error for [PhysicalMemoryElementName] on Subsystem [MemoryElementName].
This message is for the use case when an implementation has detected a Memory DIMM configuration error has been corrected.
Severity
Error
Alert Category
Critical - Memory
Serviceable
Yes
SNMP Trap ID
41
Automatically Notify Support
No
User Action
Complete the following steps:
- Check the log and service that event first.DIMMs disabled by other errors or actions could cause this event.
- Verify that the DIMMs are installed in the correct population sequence.
- Disable memory mirroring and sparing.
- If this action eliminates the mismatch, check Lenovo Support site for information related to this problem.
- Update UEFI firmware.
- Replace the DIMM.
- Replace the Processor.
Give documentation feedback