FQXSPOS4001I : Watchdog [arg1] Screen Capture Occurred .
Watchdog [arg1] Screen Capture Occurred .
This message is for the use case where an operating system error has occurred and the screen was captured.
System - Other
SNMP Trap ID
Automatically Notify Support
- If there was no operating-system error, complete the following steps until the problem is solved:
- Reconfigure the watchdog timer to a higher value.
- Make sure that the IMM Ethernet-over-USB interface is enabled.
- Reinstall the RNDIS or cdc_ether device driver for the operating system.
- Disable the watchdog.
- If there was an operating-system error, check the integrity of the installed operating system.