Skip to main content

Install the top cover

Use this information to install the top cover.

About this task

S014
shock hazard
CAUTION
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is authorized to remove the covers where the label is attached.
S033
240VA shock hazard
CAUTION

Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with metal, which might result in spattered metal, burns, or both.

Attention
  • Read the following section(s) to ensure that you work safely.

  • Make sure that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server.

  • Make sure that all internal cables are correctly routed. See Internal cable routing.

Watch the procedure
  • A video of this procedure is available at YouTube.

Procedure

  1. Align the posts inside the top cover with the slots on the chassis.
  2. Hold the front of the server and slide the top cover toward the front of the server until it clicks into place.
    Figure 1. Top cover installation
    Top cover installation