Install the 2.5-inch backplane

Use this information to install the 2.5-inch backplane.

About this task

Attention

Read the following section(s) to ensure that you work safely.
- Safety
- Installation Guidelines

Note

Depending on the configuration, the following illustration might differ slightly from your backplane.

Watch the procedure

Procedure

Align the two pins on the backplane with the corresponding holes in the chassis.
Lower the backplane into the chassis. Ensure that the pins pass through the holes and the backplane is fully seated in place.
Figure 1. 2.5-inch backplane installation

1 Pins 2 Corresponding holes

Give documentation feedback