Install the air baffle
Use this information to install the air baffle.
About this task
S002
![disconnect all power](disconnect_all_power_sources-111.png)
![disconnect all power](disconnect_all_power_sources-111.png)
CAUTION
The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
If the server is installed in a rack, remove the server from the rack.
For proper cooling and airflow, reinstall the air baffle before you turn on the server. Operating the server with the air baffle removed might damage server components.
Procedure
Align the air baffle hooks with the slots on the top of the fan cage; then, hook the air baffle onto the slots.
Figure 1. Air baffle installation
![Air baffle installation](sr250v3-073-airbaffle-450.png)
![Air baffle installation](sr250v3-073-airbaffle-450.png)
After you finish
Install the top cover. See Install the top cover.
Complete the parts replacement. See Complete the parts replacement.
Demo video
Give documentation feedback