Install the rack latches
Use this information to install the rack latches.
About this task
Attention
Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
If the server is installed in a rack, remove the server from the rack.
Note
Both rack latches are removed and installed in a similar method.
Procedure
- Align the pin hole with the pin on the chassis; then, press the rack latch onto the chassis and slightly slide it forward.Figure 1. Rack latches installation
- Install the two screws to secure the rack latch on the side of the server.Figure 2. Rack latches installation
- If necessary, install the ID label to the right rack latch by inserting the label onto the right rack latch.Figure 3. ID label installation
After you finish
Install the security bezel. See Install the security bezel.
Complete the parts replacement. See Complete the parts replacement.
Demo video
Give documentation feedback