Skip to main content

Remove an EDSFF cage

Use this information to remove an EDSFF cage.

About this task

Attention

  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. If the security bezel is installed, remove it first. See Remove the security bezel.
  2. Locate the EDSFF cage you need to remove, and then remove all the EDSFF drives installed in it. See Remove an EDSFF drive.
  3. Remove the EDSFF cage from the chassis.
    Figure 1. EDSFF cage removal
    EDSFF cage removal

    1. Press down the extended tab on the other side of the front chassis.
    2. Slide the EDSFF cage out of the front chassis.

After you finish

  1. Install a new EDSFF cage. See Install an EDSFF cage.

  2. If you are instructed to return the old EDSFF cage, follow all packaging instructions and use any packaging materials that are provided.