Skip to main content

Install an EDSFF cage

Use this information to install an EDSFF cage.

About this task

Attention

  • Read Installation guidelines to ensure that you work safely.

  • Power off the server and disconnect all power cords for this task.

  • Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-sensitive components in their static-protective packages until installation, and handling these devices with an electrostatic-discharge wrist strap or other grounding system.

Procedure

  1. Touch the static-protective package that contains the EDSFF cage to any unpainted surface on the outside of the server. Then, take the EDSFF cage out of the package and place it on a static-protective surface.
  2. Slide the diagnostics panel assembly into the front chassis as shown. Ensure that it is seated in place.
    Figure 1. EDSFF cage installation
    EDSFF cage installation

  3. Remove the EDSFF drive cage cover.
    Figure 2. EDSFF drive cage cover removal
    EDSFF drive cage cover removal

    1. Open the handle as shown.
    2. Grasp the handle and remove the drive cage cover.
  4. Install EDSFF drives into the EDSFF cage. See Install an EDSFF drive.

After you finish

Complete the parts replacement. See Complete the parts replacement.