Skip to main content

RAID flash power modules

Use the section to understand the cable routing for RAID flash power modules.

Locations of RAID flash power modules

Use the illustration and table below to locate the RAID flash power modules.

Figure 1. RAID flash power modules on the chassis
RAID flash power module locations

No.LocationSuggested PriorityUse Scenarios
1RAID flash power module on the chassis1Power for CFF and SFF RAID/HBA
2RAID flash power module on the system board tray2Power for SFF RAID/HBA
3RAID flash power module on the riser assembly (slot 3)3Power for SFF RAID/HBA

Cable routing of the RAID flash power module on the chassis

The following illustrations show the cable routing of the RAID flash power modules on the chassis

Figure 2. RAID flash power module cabling for SFF RAID/HBA adapters

FromTo
1 RAID flash power module1 RAID flash power port on the RAID/HBA adapter
Figure 3. RAID flash power module cabling for CFF RAID adapters

FromTo
1 RAID flash power module1 RAID flash power port on the RAID/HBA adapter

An extension cable is provided for each RAID flash power module for connection. Connect the RAID flash power module cable to the RAID flash power module connector on the corresponding RAID adapter as shown.

Cable routing of the RAID flash power module on the riser assembly

The following illustrations show the cable routing of the RAID flash power modules on the riser assembly.

Figure 4. Cable routing of the RAID flash power module on the riser assembly
Cable routing of the RAID flash power modules on the riser assembly

FromTo
1 RAID flash power module1 RAID flash power port on the RAID/HBA adapter

Cable routing of the RAID flash power modules on the system board tray

The following illustrations show the cable routing of the RAID flash power modules on the system board tray.

Figure 5. Cable routing of the RAID flash power modules on the system board tray
Cable routing of the RAID flash power modules on the system board tray

FromTo
1 RAID flash power module1 RAID flash power port on the RAID/HBA adapter
Figure 6. Power cable routing for RAID flash power module
Power cable routing for other components
FromTo
RAID flash power moduleRAID flash power port on the RAID/HBA adapter