RAID flash power modules
Use the section to understand the cable routing for RAID flash power modules.
RAID flash power modules in the chassis
| No. | Location | Scenario |
|---|---|---|
| 1 | RAID flash power module on the chassis | 2.5'' chassis installed with a performance heat sink |
| 2 | RAID flash power module on riser 1 slot |
|
Cable routing of the RAID flash power modules
The following illustrations show the cable routing of the RAID flash power modules on different locations:
Figure 1. On the chassis  | Figure 2. On riser 1 slot  | ||
| From | To | From | To |
| 1 RAID flash power module on the chassis | 1 RAID flash power port on the RAID/HBA adapter | 1 RAID flash power module on the PCIe slot 1 on riser 1 assembly | 1 RAID flash power port on the RAID/HBA adapter |
An extension cable is provided for each RAID flash power module for connection. Connect the RAID flash power module cable to the RAID flash power module connector on the corresponding RAID adapter as shown.
Figure 3. Power cable routing for RAID flash power module
Give feedback