Skip to main content

Install the RAID super capacitor module

Use this information to install the RAID super capacitor module.

Read the installation GuidelinesPower off the server for this taskATTENTION: Static Sensitive Device Ground package before opening
Before installing a RAID super capacitor module:

  1. Touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.

  2. Locate the holder for the RAID super capacitor module on the air baffle and note the orientation of the RAID super capacitor module.

To install a RAID super capacitor module, complete the following steps:

Watch the procedure

A video of this procedure is available at YouTube.

Figure 1. RAID super capacitor module installation
RAID super capacitor module installation

  1. Gently press and hold the tab on the air baffle as shown.
  2. Insert the RAID super capacitor module into the holder on the air baffle.
  3. Press down the RAID super capacitor module to install it into the holder.

After installing the RAID super capacitor module, connect the RAID super capacitor module to a RAID adapter with the extension cable that comes with the RAID super capacitor module.