8i/16i RAID/HBA adapter + CFF expander
This section provides cable routing information for configuration (three 8 x 2.5-inch SAS/SATA front drive backplanes, two 4 x 2.5-inch SAS/SATA middle drive backplanes and one 4 x 2.5-inch SAS/SATA rear drive backplane) with one 8i/16i RAID/HBA adapter and one CFF expander.
8i/16i RAID/HBA adapter and CFF expander
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Signal cable routing
| From | To |
|---|---|
| 1 BP 1: SAS | 1 CFF expander: C0 |
| 2 BP 2: SAS | 2 CFF expander: C1 |
| 3 BP 3: SAS | 3 CFF expander: C2 |
| 4 Onboard: CFF EXP PWR | 4 CFF expander: PWR |
5 8i/16i adapter:
| 5 CFF expander: INPUT |
| 6 BP 4 and BP 5: SAS | 6 CFF expander: C3 |
| 7 BP 6: SAS | 7 CFF expander: C4 |
Give documentation feedback