CFF 16i RAID/HBA adapter + CFF expander
This section provides cable routing information for configuration (three 8 x 2.5-inch SAS/SATA front drive backplanes and one 4 x 2.5-inch SAS/SATA rear drive backplane) with one CFF 16i RAID/HBA adapter and one CFF expander.
CFF 16i RAID/HBA adapter and CFF expander
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
Figure 1. Signal cable routing part 1  | Figure 2. Signal cable routing part 2  | ||
From | To | From | To |
| 1 BP 1: SAS | 1 CFF expander: C0 | 1 CFF adapter: INPUT | 1 Onboard: PCIe 8 |
| 2 BP 2: SAS | 2 CFF expander: C1 | 2 CFF adapter: PWR | 2 Onboard: CFF RAID PWR |
| 3 BP 3: SAS | 3 CFF expander: C2 | ||
| 4 Onboard: CFF EXP PWR | 4 CFF expander: PWR | ||
| 5 CFF adapter: C0C1 | 5 CFF expander: INPUT | ||
| 6 Rear backplane: SAS | 6 CFF expander: C3 | ||
Give documentation feedback