Onboard connectors + 8i RAID/HBA adapter + Retimer card
The following shows the cable connections for the front (8 x 2.5-inch AnyBay + 8 x 2.5-inch NVMe) configuration with one 8i RAID/HBA adapter and one retimer card.
To connect the processor interconnection cable when two processors are installed, see Processor interconnection cable routing.
Connections between connectors: 1 ↔ 1, 2 ↔ 2, 3 ↔ 3, ... n ↔ n
SAS/SATA cable routing
Figure 1. SAS/SATA cable routing to 8i adapter
From | To |
|---|---|
| 1Backplane 1: SAS | 18i adapter
|
NVMe cable routing
Figure 2. NVMe cable routing to onboard connectors and retimer card
From | To |
|---|---|
| 1Backplane 1: NVMe 0-1 | 1Onboard: PCIe 5 |
| 2Backplane 1: NVMe 2-3 | 2Onboard: PCIe 7 |
| 3Backplane 2: NVMe 0-1 | 3Retimer card: C0 |
| 4Backplane 2: NVMe 2-3 | 4Retimer card: C1 |
| 5Backplane 1: NVMe 4-5 | 5Onboard: PCIe 6 |
| 6Backplane 1: NVMe 6-7 | 6Onboard: PCIe 8 |
| 7Backplane 2: NVMe 4-5 | 7Onboard: PCIe 9 |
| 8Backplane 2: NVMe 6-7 | 8Onboard: PCIe 10, 11 |
Give documentation feedback