x8 OCP module
Use the section to understand the cable routing for the x8 OCP module.
Note
- Make sure the cable is routed under the radiator bracket as illustrated.
- After connecting cables, equally divide the cables that go through the right side of the front drive tray into two bundles, and secure them with the two cable ties.Figure 1. Securing cables with cable ties
Choose the routing plan according to the type of drive installed in the system:
Two 2.5-inch drives
Figure 2. OCP module cable routing
| Cable | From | To |
|---|---|---|
| 1 | System board assembly: PCIe connector 12 | System board assembly: PCIe connector 9 |
| Backplane: NVMe 0-1 |
Two E3.S drives
Figure 3. OCP module cable routing
| Cable | From | To |
|---|---|---|
| 1 | System board assembly: PCIe connector 12 | System board assembly: PCIe connector 9 |
| Backplane: EDSFF 0-1 |
Give documentation feedback