Skip to main content

Remove the processor and memory expansion tray

Use this procedure to remove the processor and memory expansion tray.

To remove the processor and memory expansion tray, complete the following steps:

  1. Slightly pull out power supply 2.
    Attention
    Do not remove the processor and memory expansion tray without physically disconnecting power supply 2.
  2. Grasp the handle of the processor and memory expansion tray; then, pull and rotate it all the way up until it is in the vertical position. This disengages the expansion tray from the system board.
    Figure 1. Processor and memory expansion tray removal

  3. Loosen the two screws that secure the expansion tray to the chassis.
  4. Grasp the handle and slowly lift the expansion tray from the server; then, set it on a flat surface.