Skip to main content

Install the front bezel

Follow instructions in this section to install the front bezel.

About this task

To avoid potential danger, read and follow the following safety statements.
  • S002
    disconnect all power
    CAUTION
    The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Attention

Procedure

Install the front bezel.
  1. Align the three plastic tabs on the right side of the front bezel with the corresponding holes on the chassis.
  2. Pivot the front bezel and front door inward until the front bezel snaps into place on the left side.
Figure 1. Installing the front bezel
Installing the front bezel

After this task is completed

Complete the parts replacement. See Complete the parts replacement.

Demo video

Watch the procedure on YouTube