Remove the front bezel
Follow instructions in this section to remove the front bezel.
About this task
- S002CAUTIONThe power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
Read the Installation guidelines to ensure that you work safely.
Turn off the server and peripheral devices, and disconnect the power cords and all external cables (see Power off the server).
If the server is in a rack, remove it from the rack.
Remove any locking device that secures the server cover, such as a Kensington lock or a pad lock.
- Make preparations for this task.
- Remove the front bezel.
Figure 1. Removing the front bezel
- Lift the three plastic tabs to release left side of the bezel from the chassis.
- Pivot the bezel as shown to remove it from the chassis.
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.