Server models with eight 2.5-inch hot-swap drives (hardware RAID)

Use this section to understand the cable routing for server models with eight 2.5-inch hot-swap drives (hardware RAID).

Note

Ensure that all cables are routed through the correct cable clips.

Figure 1. Cable routing for server models with eight 2.5-inch hot-swap drives (hardware RAID)

Cable	From	To
1 Power cable	Power connector on the backplane	Backplane 1 power connector on the system board
2 SAS signal cable	SAS 0 and SAS 1 connectors on the backplane	Connectors on the RAID adapter