Server models with four 3.5-inch hot-swap drives (hardware RAID)
Use this section to understand the cable routing for server models with four 3.5-inch hot-swap SAS/SATA drives (hardware RAID).
Note
Ensure that all cables are routed through the correct cable clips.
Broken lines indicate the hidden parts.
Figure 1. Cable routing for server models with four 3.5-inch hot-swap drives (hardware RAID)
| Cable | From | To |
|---|---|---|
| 1 Power cable for backplane 1 | Power connector on backplane 1 | Backplane 1 power connector on the system board |
| 2 SAS signal cable for backplane 1 | SAS connector on backplane 1 | An available connector on the RAID adapter |
Give documentation feedback