Complete the parts replacement
Go through the checklist to complete parts replacement
Ensure that all components have been reassembled correctly and that no tools or loose screws are left inside your server.
Ensure that the CMOS battery is installed on the system board. See Install the CMOS battery (CR2032).
Properly route and secure the cables in the server. Refer to the cable connecting and routing information for each component.
Reinstall the server cover. See Install the server cover.
Reconnect the power cords and any cables that you removed.
NoteTo avoid component damage, connect all the other cables before connecting the power cords.Power on the server and any peripheral devices. See Power on the server.
Update the server configuration.
Download and install the latest device drivers: Lenovo Data Center Support.
Update the system firmware. See Update the firmware.
Reconfigure the disk arrays if you have installed or removed a storage drive or a RAID adapter. See Lenovo XClarity Provisioning Manager portal page for the LXPM documentation compatible with your server.