Install the front bezel

Follow instructions in this section to install the front bezel.

About this task

S002

CAUTION

The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Attention

Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

Procedure

1. Install the front bezel.
   1. Insert the three plastic tabs on the bottom of the front bezel with the corresponding slots on the front of the chassis.
   2. Pivot the front bezel towards the chassis until it snaps into place.
      Figure 1. Installing the front bezel
      
      
2. Install the server cover. See Install the server cover.