Remove the front bezel

Follow instructions in this section to remove the front bezel.

About this task

S002

CAUTION

The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Attention

• Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.
• Power off the server and peripheral devices and disconnect the power cords and all external cables. See Power off the server.
• Remove any locking device that secures the server, such as a Kensington lock or a padlock.
• Place the server on its side with the cover up.

Procedure

1. Remove the server cover. See Remove the server cover.
   Attention

   The heat sink and processor could be very hot. To avoid burning yourself, wait for a few minutes after turning off the server before you remove the server cover.
2. Remove the front bezel.
   1. Release the three plastic tabs on the front bezel.
   2. Rotate the front bezel to remove it from the chassis.
      Figure 1. Removing the front bezel