Install an M.2 drive

Follow instructions in this section to install an M.2 drive.

About this task

S002

CAUTION

The power-control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.

Attention

• Read Installation Guidelines and Safety inspection checklist to ensure that you work safely.

• Touch the static-protective package that contains the component to any unpainted metal surface on the server; then, remove it from the package and place it on a static-protective surface.

Procedure

1. Locate the M.2 drive slot on the system board. See Side view.
2. Install M.2 drive 1.
   1. Insert the M.2 drive at an angle into the connector.
   2. Place down the M.2 drive onto the screw hole.
   3. Install the screw to secure the M.2 drive in place.
   Figure 1. Installing M.2 drive 1
   
   
3. Install M.2 drive 2.
   1. Insert the M.2 drive at an angle into the connector.
   2. Place down the M.2 drive onto the M.2 drive retainer.
   3. Insert the retainer post into the retainer to secure the M.2 drive in place.
   Figure 2. Installing M.2 drive 2