Cable routing for drive bay 2
Follow the instructions in this section to learn how to do cable routing for the drive in bay 2.
Figure 1. Cable routing for drive bay 2
| From | To (system board) | Cable |
|---|---|---|
| 1 Bay 2 drive signal connector | 1 SATA 2 connector | 7pin SATA to 7pin Slim ODD SATA, 520 mm |
| 2 Bay 2 drive power connector | 2 SATA power 2 connector | 4pin power to HDD&Slim ODD, 300 mm/330 mm/120 mm |
For the system-board connector locations, see System-board connectors for cable routing.
Give documentation feedback