Cable routing for drive bay 3
Follow the instructions in this section to learn how to do cable routing for the drive in bay 3.
Figure 1. Cable routing for drive bay 3
| From | To (system board) | Cable |
|---|---|---|
| 1 Bay 3 drive power connector | 1 SATA power 3 connector | 4pin power cable, 380 mm |
| 2 Bay 3 drive signal connector | 2 SATA 3 connector | 7pin SATA to 7pin RA SATA cable, 185 mm |
For the system-board connector locations, see System-board connectors for cable routing.
Give documentation feedback