Install the RAID super capacitor module

Use this information to install the RAID super capacitor module.

Read the installation Guidelines

Power off the server for this task

ATTENTION: Static Sensitive Device Ground package before opening

To install a RAID super capacitor module, complete the following steps:

Watch the procedure

• A video of this procedure is available at YouTube

1. Touch the static-protective package that contains the new RAID super capacitor module to any unpainted surface on the outside of the server. Then, take the new RAID super capacitor module out of the package and place it on a static-protective surface.
2. Insert one end of the RAID super capacitor module into the slot of the air baffle. Then, press down the other end of the RAID super capacitor module until it snaps in place.
   Figure 1. RAID super capacitor module installation
   

   

   
   
3. Connect the RAID super capacitor module to the extension cable.