FQXSPNM4010I : DHCP[[arg1]] failure, no IP address assigned.
DHCP[[arg1]] failure, no IP address assigned.
This message is for the use case where a DHCP server fails to assign an IP address to a Management Controller.
Automatically Notify Support
Complete the following steps until the problem is solved:
- Make sure that the XCC/BMC manegment network cable is connected and the network ports is active.
- Make sure that there is a DHCP server on the network that can assign an IP address to the XCC/BMC.
- If problem persists, collect Service Data log.
- Contact Lenovo Support.