Skip to main content

Replacing the battery holder on 5U server model

Use this information to replace the battery holder on the 5U server model.

Attention
To ensure proper cooling and airflow, do not operate the server for more than 30 minutes with the side cover removed.

To install the battery holder on the 5U server model with hot-swap power supplies, complete the following steps.

  1. Read the safety information in Safety and Installation guidelines.
  2. Attach the latch retainer onto the battery holder.
    Figure 1. Latch retainer attachment onto battery holder for 5U server models with hot-swap power supplies
    Latch retainer attachment onto battery holder for 5U server models with hot-swap power supplies
  3. Insert the battery holder into the bracket.
    Figure 2. Installing battery holder into bracket for 5U server model with hot-swap power supplies
    Installing battery holder into bracket for 5U server model with hot-swap power supplies
  4. Tighten the screw to secure the battery holder and bracket to the chassis.
    Figure 3. Installing battery holder and bracket into chassis for 5U server model with hot-swap power supplies
    Installing battery holder and bracket into chassis for 5U server model with hot-swap power supplies
  5. Stand the server back up in its vertical position.
  6. Install and lock the side cover (see Replacing the side cover).
  7. Reconnect the external cables and power cords; then, turn on the attached devices and turn on the server.