S.51009 : [S.51009] No system memory has been detected.
[S.51009] No system memory has been detected.
No Memory Detected
Severity
Error
User Response
Complete the following steps:
- If any memory errors are logged other than this one, take actions indicated for those codes first.
- If no other memory diagnostic codes appear in the logs, verify that all DIMM connectors are enabled using the Setup utility or the Advanced Settings Utility (ASU).
- If the problem remains, shut down the system and physically verify that one or more DIMMs are installed and that all DIMMs are installed in the correct population sequence.
- If DIMMs are present and properly installed, check for any lit DIMM-connector LEDs, and if found, reseat those DIMMs.
- If the problem remains, replace the processor.
- If the problem remains, replace the system board.
Give feedback