power command errors
This topic lists error messages for the power command.
See Common errors for a list of error messages that apply to all commands. See power command for information about command syntax and examples of command use.
| Error message | Definition |
|---|---|
| -ap can only be issued to blade target | A user attempts to apply the -ap option to a device other than a compute node. |
| -ap must be 'restore' or 'auto' for blade[x] where x is the node bay number. | A user tries to enter a -ap command option argument other than restore or auto for a storage node that requires one of these arguments. |
| -c can only be issued to blade target | A user tries to direct the power -c command option to a non-compute node target. |
| -c must be used with -on or -cycle | A user tries to use the -c command option without specifying the -on or -cycle command options. |
| -cycle can only be issued to blade, I/O module or stand-alone server target | A user tries to direct the power -cycle command to a command target that does not support it. |
| -d can only be issued to blade or IO module target | A user attempts to apply the -d option to a device other than a compute node or I/O module. |
| -on/-off/-cycle not supported on switch[x] where x is the I/O-bay number. | A user tries to direct a power command option to an I/O module that does not support it. |
| -on/-off/-softoff/-cycle not supported on blade[x] where x is the node bay number. | A user tries to direct a power command option to a compute node that does not support it. |
| -post can only be issued to I/O module target | A user tries to direct the -post option to a non-I/O module target. |
| -post must be used with -state | A user tries to use the -post command option without specifying the -state command option. |
| -sms can only be issued to blade target | A user attempts to issue the -sms command option to a target that is not a compute node. |
| -sms is not supported on blade[x] where x is the node bay number. | A user attempts to issue the -sms command option to a compute node target that does not support this feature. |
| -softoff can only be issued to blade or stand-alone server target | A user tries to direct the power -softoff command to a command target that does not support it. |
| -state can only be issued to blade, I/O module, or stand-alone server target | A user tries to direct the power -state command to a command target that does not support it. |
| -wol, -local, -ap, -d and -sms must be used exclusive of the other options | A user attempts to enter multiple command options together that must be used alone. |
| -wol/-local can only be issued to chassis or blade target | A user tries to direct the power -wol or power -local command to a command target that does not support it. |
| -wol/-local/-sms not supported on blade[x] where x is the node bay number. | A user tries to direct a power command option to a compute node that does not support it. |
| Error retrieving power state for I/O Module slot where slot is the I/O-module subslot. | An error occurs while retrieving a power state. |
| Getting POST results failed | An error occurs while retrieving POST results. |
| Invalid POST results. | The POST results are not valid. |
| Not supported by this type of I/O module. Type env -h for help on changing targets. | A user attempts to apply an option to an I/O module that does not support the option. |
| POST results not complete: hex_code where the hex_code value varies based on the problem that was encountered. | The POST results are not available. See the documentation that comes with the device that failed to respond correctly to the power command for information about the hex_code value. |
| Power not supported on this target | A user tries to direct the power command to a command target that does not support it. |
| Powering on/off blade failed. | An error occurs while powering the compute node on or off. |
| Powering on/off I/O Module failed. | An error occurs while the CMM is powering the I/O module on or off. |
| Powering on/off network clock failed. | An error occurs while the CMM is powering the network clock on or off. |
| Powering on/off Telco Alarm Panel failed. | An error occurs while the CMM is powering the Telco Alarm Panel on or off. |
| Resetting blade failed. | An error occurs while the CMM is resetting the compute node. |
| Restarting I/O Module failed. | An error occurs while the CMM is restarting the I/O module. |
| Shutting down OS and powering off blade failed. | An error occurs while the CMM is shutting down the operating system and powering off the compute node. |
| SOL not supported on blade[x] where x is the node bay number. | A user tries to run a power command option that starts a SOL (serial over LAN) session on a compute node that does not support SOL. |
| The argument of -d must be in a range of min and max where min and max indicate the range of acceptable values. | A user tries to enter an argument for the -d command option that is out of range. |
| The argument of -d must be numeric | A user tries to enter a non-numeric argument for the -d command option. |
| The I/O Module is powering off. | A user tries to power on, power off, or restart a RAID SAS module which is in the process of powering off. |
Give documentation feedback