Skip to main content

temps command errors

This topic lists errors for the temps command.

See Common errors for a list of error messages that apply to all commands. See temps command for information about command syntax and examples of command use.

Table 1. temps command errors.

The error table is a multi-row, two-column table where each row describes a CMM CLI command error: column one lists the error reported by the command-line interface and column two describes what the error means.

Error messageDefinition
Error getting temperature data from targetAn error occurs while retrieving temperature data.
Getting power state of blade node_number failed.

where node_number identifies the compute node.

An error occurs while the CMM is reading the power state of the specified compute node.
No temperature available for targetA user tries to read temperature data that is not available.
Temperature data is not supported on this targetA user tries to read temperature data from a command target that does not support it.