tcpcmdmode command errors
This topic lists error messages for the tcpcmdmode command.
See Common errors for a list of error messages that apply to all commands. See tcpcmdmode command for information about command syntax and examples of command use.
Error message | Definition |
---|---|
Error changing TCP command mode connection. | An error occurs while the CMM is changing the TCP command mode Connection. |
Error disabling tcpcmdmode. | An error occurs while the CMM is disabling the TCP command mode. |
Error enabling TCP command mode. | An error occurs while the CMM is enabling the TCP command mode. |
Invalid parameter. Input must be numeric. | A user tries to enter a parameter value for the -t (timeout) command option containing non-numeric characters. For example, tcpcmdmode -t 200m. |
Invalid parameter. The timeout must be between 0 and 4294967295 seconds. | A user tries to enter a parameter value for the -t (timeout) command option that is outside of the valid range. |
Maximum connections can not exceed maximum where maximum designates the total number of permitted connections. | A user attempted to configure more connections than the maximum number of connections supported. |
No valid server certificate is in place for Secure TCP Command Mode. Try rebooting the CMM, or regenerating the CA certificate with the 'sslcfg -gen ca' command. | The user issues a command to enable the Secure TCP Command Mode when a valid server certificate is not in place. |
The total number of secure and legacy connections of TCP Command Mode cannot exceed maximum where maximum designates the total number of permitted connections. | A user attempted to configure more TCP Command Mode connections than the maximum number of secure and legacy connections supported. |
Warning: Communication with FSM via Secure TCP Command Mode has been disabled. | A user has disabled the Secure TCP command mode. |
Warning: Communication with FSM via TCP Command Mode has been disabled. | A user has disabled the TCP command mode. |
Give feedback