Skip to main content

sddump command errors

This topic lists errors for the sddump command.

See Common errors for a list of error messages that apply to all commands. See sddump command for information about command syntax and examples of command use.

Table 1. sddump command errors.

The error table is a multi-row, two-column table where each row describes a CMM CLI command error: column one lists the error reported by the command-line interface and column two describes what the error means.

Error messageDefinition
Data dump collection is not supported on blade x

where x is the number of the node bay.

The specified data collection is not supported by the specified compute node.
Data dump currently in progress. Please try again laterA user tries to direct a command to target while it is busy performing data collection.
Error initializing data dump for switch[x]

where x is the I/O-module bay number.

An error occurs during data collection.
Error reading data dump statusAn error occurs during data collection.
Error reading error stringAn error occurs during data collection.
Initiate data collection not supported on blade[x]

where x is the number of the node bay.

The CMM is unable to collect the requested data from the specified compute node.
Initiate data dump failedThe CMM is unable initiate data collection.
Initiate data dump not supported on switch[x]

where x is the I/O-module bay number.

The selected I/O module does not support data collection.
Initiate data collection type failed.The CMM is unable initiate data collection from thecompute node.
This command cannot be issued right now. Another data dump is in progress.The user attempts to initiate data collection for an I/O module where a data collection is already in progress.