vlan command errors
This topic lists error messages for the vlan command.
See Common errors for a list of error messages that apply to all commands. See vlan command for information about command syntax and examples of command use.
| Error message | Definition |
|---|---|
| -sol must be enabled on one vlan | A user attempts to disable SOL when only one VLAN is in use. |
| All changes must be committed using -commit before the commit timeout expires. | A user fails to commit CMM changes within the specified time period. |
| All changes must be committed within time minutes using -commit. where time is the commit time limit. | A user fails to commit CMM changes within the specified time period. |
| Cannot enable VLAN - configuration incomplete. | A user attempts to enable a VLAN entry before configuring all required fields. |
| Changes to the VLAN ID and IP config will take affect after the entry is enabled or restarted. | Advisory message indicating that additional user action is required before a change takes effect. |
| Error writing -i - the IP address is either a duplicate, or in the same subnet as another entry | A user attempts to enter a duplicate IPv4 IP address. |
| Error writing -i6 - the IP address is either a duplicate, or in the same subnet as another entry | A user attempts to enter a duplicate IPv6 IP address. |
| Error writing -sol - currently assigned to another VLAN. | A user attempts to enable the -sol option for a VLAN entry before disabling the option on another VLAN entry where it is already in use. |
| Error writing -vid - the VLAN ID is a duplicate. | A user attempts to enter a duplicate VLAN ID. |
| Invalid syntax. -c cannot be used on the fixed entry. | A user attempts to set the IPv4 configuration method of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -c6 cannot be used on the fixed entry. | A user attempts to set the IPv6 configuration method of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -commit must be used by itself. | A user attempts to issue a command to the CMM with the -commit option while specifying another argument or option. |
| Invalid syntax. -cto must be used by itself. | A user attempts to issue a command to the CMM with the -cto option while specifying another argument or option. |
| Invalid syntax. -delete must be used by itself, or in combination with -vi. | A user attempts to issue a command to the CMM with the -delete option while specifying another argument or option, other than the -vi option. |
| Invalid syntax. -g cannot be used on the fixed entry. | A user attempts to set the IPv4 gateway of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -g6 cannot be used on the fixed entry. | A user attempts to set the IPv6 gateway of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -i cannot be used on the fixed entry. | A user attempts to set the IPv4 address of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -i6 cannot be used on the fixed entry. | A user attempts to set the IPv6 address of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -p6 cannot be used on the fixed entry. | A user attempts to set the IPv6 prefix length of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -s cannot be used on the fixed entry. | A user attempts to set the IPv4 subnet of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sm1 cannot be used on the fixed entry. | A user attempts to set an IPv4 subnet mask of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sm2 cannot be used on the fixed entry. | A user attempts to set an IPv4 subnet mask of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sm3 cannot be used on the fixed entry. | A user attempts to set an IPv4 subnet mask of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sp61 cannot be used on the fixed entry. | A user attempts to set an IPv6 subnet prefix length of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sp62 cannot be used on the fixed entry. | A user attempts to set an IPv6 subnet prefix length of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sp63 cannot be used on the fixed entry. | A user attempts to set an IPv6 subnet prefix length of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sr1 cannot be used on the fixed entry. | A user attempts to set an IPv4 subnet route of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sr2 cannot be used on the fixed entry. | A user attempts to set an IPv4 subnet route of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sr3 cannot be used on the fixed entry. | A user attempts to set an IPv4 subnet route of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sr61 cannot be used on the fixed entry. | A user attempts to set an IPv6 subnet route of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sr62 cannot be used on the fixed entry. | A user attempts to set an IPv6 subnet route of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -sr63 cannot be used on the fixed entry. | A user attempts to set an IPv6 subnet route of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -state cannot be used on the fixed entry. | A user attempts to set the VLAN state of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -tag cannot be used on non-default entries. | A user attempts to enable or disable the VLAN tagging state of the first CMM VLAN index entry (referred to as the fixed entry), that can not be changed. |
| Invalid syntax. -vi is needed to perform this operation. | A user attempts to add or modify a CMM VLAN entry without specifying the VLAN entry index number. |
| Invalid syntax. -vid is needed to create a new entry. | A user attempts to create a new entry without specifying a VLAN ID. |
| Invalid syntax. restart can only be used on individual, non-fixed entries. | A user attempts to restart the first CMM VLAN index entry (referred to as the fixed entry), that can not be restarted. |
| Invalid syntax. The fixed entry cannot be deleted. | A user attempts to delete the first CMM VLAN index entry (referred to as the fixed entry). This entry can not be deleted. |
Give documentation feedback