Skip to main content

ekm command

Use the ekm command to display the external key management status of the RAID adapter, and enable or disable the external key management.

ekm command syntax

Usage: OneCli.exe [misc] raid ekm [--bmc|-b <arg>] [--ctrl <arg>] 
[--mode <arg>] [--check-trust|-C]
[--never-check-trust|-N] [--force]
[--quiet|-q] [--bmc-username|-u <arg>]
[--bmc-password|-w <arg>] [--output|-o <arg>]
[--nolog] [--config <arg>]
[--help|-h]
Table 1. ekm command specific parameters
ParameterRequired/OptionalNotes
--ctrlOptional

Specify controller ID starting with index 1.

Example: --ctrl 1.

--modeOptional

Specify the external key management mode.

Values: enable, disable.

  • --bmc, -b

  • --bmc-username, -u

  • --bmc-password, -w

  • --check-trust, -C

  • --never-check-trust, -N

  • --nolog

  • --output, -o

Optional

Refer to Table 2.

Example of the ekm command

OneCli.exe raid ekm --bmc xxxx:xxxx@xx.xx.xx.xx