fwdeviceorder command
Use the fwdeviceorder command to enable or disable the firmware device ordering
feature of the RAID adapter.
fwdeviceorder command syntax
Usage: OneCli.exe [misc] raid fwdeviceorder [--bmc|-b <arg>] [--mode <arg>]
[--ctrl <arg>] [--force]
[--check-trust|-C] [--never-check-trust|-N]
[--output|-o <arg>] [--nolog]
[--config <arg>] [--help|-h]
| Parameter | Required/Optional | Notes |
|---|---|---|
| --ctrl | Optional | Specify controller ID starting with index 1. Example: --ctrl 1. |
| --mode | Optional | Specify the firmware device order mode. The values include: on, off. |
Example of the fwdeviceorder command
OneCli.exe misc raid fwdeviceorder --bmc xxxx:xxxx@xx.xx.xx.xx
Give documentation feedback