Skip to main content

Replacing the power paddle card on to the GPU tray

Use this information to install the power paddle card on to the GPU tray.

Before you install the paddle card, complete the following steps:
  1. Read Safety and Installation guidelines.
  2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
  3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

To install the power paddle card on to the GPU tray, complete the following steps:

  1. Remove the cover (see Removing the compute node cover).
  2. Place the power paddle card on the mounting studs in the GPU tray with an angle.
    Figure 1. Power paddle card installation
    Power paddle card installation
  3. Install the four screws that secure the power paddle card to the GPU tray.
    Figure 2. Power paddle card screws installation
    Power paddle card screws installation
  4. Reconnect the power paddle card cables.
  5. Reinstall the GPU air baffle (see Replacing the air baffle).
  6. Reinstall the cover (see Installing the compute node cover).
  7. Slide the compute node into the rack.
  8. Reconnect the power cords and any cables that you removed.
  9. Turn on the peripheral devices and the compute node.