Removing a RAID adapter battery

Use this information to remove a remotely installed RAID adapter battery.

Before you remove a RAID adapter battery, complete the following steps:

1. Read Safety and Installation guidelines.
2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

To remove a RAID adapter battery, complete the following steps:

1. Remove the cover (see Removing the compute node cover).
2. Grasp the battery out of the battery holder.
   Figure 1. RAID adapter battery removal
   
   
3. Disconnect the battery cable from the supercap cable latch.
   Figure 2. RAID adapter battery cable removal
   
   

If you are instructed to return the RAID adapter battery, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.