Removing the SD adapter

Use this information to remove the SD adapter.

Before you remove the SD adapter, complete the following steps:

1. Read Safety and Installation guidelines.
2. If the compute node is installed in a NeXtScale n1200 Enclosure, remove it (see Removing a compute node from a chassis for instructions).
3. Carefully lay the compute node on a flat, static-protective surface, orienting the compute node with the bezel pointing toward you.

To remove the SD adapter, complete the following steps:

1. Remove the cover (see Removing the compute node cover).
2. If necessary, remove PCI riser-card assembly 2 (see Removing a PCI riser-cage assembly).
3. Loosen the two screws.
4. Lift the SD adapter out of the server.
5. Remove the SD cards.
   Figure 1. SD adapter removal
   
   

If you are instructed to return the SD adapter, follow all packaging instructions, and use any packaging materials for shipping that are supplied to you.